Built when Netflix first took away password sharing. Thanks for the heads up Netflix! Would not want to start this project now 😂

Edit: adding temp and specs

I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380

Drives are 10x 14 tb wdd in raidz1, 6 256gb sata ssds in a pair of 3 wide mirrors for special vdev metadata, a 512gb nvme for read cache, and a 64gb optane for slog

    • MajorMajormajormajor@lemmy.ca
      link
      fedilink
      English
      arrow-up
      13
      ·
      1 month ago

      Yeah, seems a second fan would help with air flow into/out of the case. Depending on how air tight everything is when it’s closed.

      • fuckwit_mcbumcrumble@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        23
        ·
        1 month ago

        But enclosed in a box without much airflow and those temps are going to creep up over time. And take even longer to cool down. Hopefully there’s fans in the bottom or side. Because one exhaust is not great for even just the heat from those hard drives.

        I think the best way to handle airflow out is to have a turn or two on the intake/exhausts for the noise to get trapped. I personally just put mine in my basement though. That limits the sound pretty well.

      • Sibbo@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 month ago

        They usually do transcoding when you watch a movie or so. Depending on hardware that may heat it up a bit. I guess if it would have heating problems then OP would have resolved that already though.

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      1
      ·
      1 month ago

      Added them in another comment, but I’ll put them here to. This is while I have plex and frigate running with tdarr rencoding 8 files into av1 at a time

  • Quacksalber@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    58
    arrow-down
    2
    ·
    1 month ago

    I don’t get this setup. First you install a lot of sound proofing, then you install one fan that has to run near light speed to keep that computer cool.

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      arrow-down
      1
      ·
      1 month ago

      I have an intake on the bottom pulling cold air, and the top is for exhaust. Both are 3000 rpm fans and together keep the tennis real low. I added the current tennis in a comment while it’s running full tilt

  • 0TT0@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    38
    arrow-down
    7
    ·
    1 month ago

    i love the toxic kiddies on selfhost these days “its too hot the fans wrong” op explains and gets downvoted. whats the saying?, “not my circus not my monkeys”. if this is the energy your going to bring to this community go back to reddit and be a toxic pos there.

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      31
      arrow-down
      1
      ·
      1 month ago

      I’m choosing to focus on the positive comments, and giving info to those who doubt. In the end I know there’s a few people at least who saw this and got some inspiration for a fun project

      • 0TT0@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        12
        arrow-down
        2
        ·
        edit-2
        1 month ago

        You are a bigger person than I <3 what youre doing is a great solution to noise in a living space and if you have no thermal throttling its designed exactly for what its intended for. Thanks for sharing you have given me some ideas for managing my own noise issues regarding homelabbing.

        • Hamknight@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          17
          arrow-down
          1
          ·
          1 month ago

          I just think no one’s really coming at it in a way they think it’s rude, and most had been out of concern, just worded rough. I definitely can be rough with my words sometime so I can’t be too mad. Also thanks for engaging ❤️ love you and all the lurkers following along

          • 0TT0@sh.itjust.works
            link
            fedilink
            English
            arrow-up
            8
            arrow-down
            2
            ·
            1 month ago

            lolz that’s wayyyy too much emotional maturity for the internet. we need more of it :)

    • Lucidlethargy@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      3
      ·
      edit-2
      1 month ago

      I mean… Look at the setup, though.

      Nobody is trying to be mean, it’s just a pretty rough setup where thermals are concerned. And OP appears to be dismissing every joke about it and claiming it’s not an issue.

      Good luck, OP. Hope this is the hottest your place ever gets, in which case you might be alright. Just keep an eye on those temps since servers need to run very cool to avoid long term damage and wear and tear. Be extra cautious of your large array of HDD’s. Those can get hot and people don’t always think about that.

      Edit: OP mentioned lower in the thread that they are pulling 300-350 watts from the wall. That is a lot of heat. Maybe they live in Alaska and keep their place at 55 degrees, though. We don’t know… But for those looking on and considering their own setup, a lot of red flags are here for those who have higher temps in their homes.

      • Hamknight@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 month ago

        I keep my place at 74, and basically have a per room heat pump to never have the temp be an issue even on a 108 day. I’ve been running the setup for over two years now and have monitored thermals the whole time and have never had an issue. I understand the concern, and had the same concerns at first too, but the results don’t lie. It’s just very well tuned for it’s environment

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      edit-2
      1 month ago

      Lol, it’s warm. Though thanks to the intake and exhaust built into the cabinet the temps are great. I added what they currently are while it’s rencoding by library.

  • Hamknight@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    26
    ·
    edit-2
    1 month ago

    For those worried about temps. The cpu never goes past the 80s when being ran hard, and drive temps are comfortably in the 40s

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 month ago

      Oh, and if anyone is curious on specs. This is my old gaming rig but it’s: I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380

    • WolfLink@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      4
      ·
      1 month ago

      A little bit of airflow can make a huge difference. If it works it works. I think the doubters have just never experimented.

      • Hamknight@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 month ago

        Super quiet, and had been running non stop for over a year no with no problems 😊 also that i9 runs super hot. When it was in my lil gaming rig it was always running up near 90. So retiring to the server had been much more gentle on it, lol

          • Hamknight@lemmy.worldOP
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 month ago

            It just had a very undersized cooler at the time (pics of case are hiding here somewhere lol). It would idle normally, but load put it near throttle. Moved to the 9800x3d though in the same case and that performs like a dream

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      3
      arrow-down
      1
      ·
      1 month ago

      The whole setup is really quiet actually! The cabinet has an intake fan hiding on the bottom, while the top fan is just exhaust. Then all the fans in the system are built for front to top exhaust. I posted temps while the system is running full tilt of you were curious

    • crayons_to_chaos@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 month ago

      not op, but yeah looks like. my old gaming tower is about to get debian installed and go on perma server duty, and the onboard wifi has an antenna like this, which may let me leave it in the garage.

  • crandall@lemmy.today
    link
    fedilink
    English
    arrow-up
    13
    ·
    1 month ago

    I assume that’s all sound proofing. How well does it work? And like the other commenter asked, I’m curious how it affects the temperature

    • CmdrShepard49@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      7
      ·
      1 month ago

      That looks like the Fractal Define 6 case which already has built in soundproofing. I have mine on a desk doing the exact same job with even more drives and I don’t even hear it from a couple feet away.

      Edit: actually not a Define 6 after looking closer. Mine doesn’t have those weird latches on the side panels despite otherwise looking identical.

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 month ago

      The sound proofing helps a ton. This sits in my living room and I can barely hear it. There’s also a second fan hiding on the bottom for intake, while the top is just exhaust. Keeps temps nice and cool

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      1 month ago

      Posted temps and specs if you were curious 😉 guessing you didn’t think I had more fans in the cabinet

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 month ago

      Oooo, cute mini system! I’ve always wanted to start a cluster with tiny towers like that

  • MrEff@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    ·
    1 month ago

    I am guessing the egg-shell foamed enclosure is for the sound, but you probably have a bunch of sound coming from the fan port, nessisary for ventilation. You can cut a lot of the sound but maintain the airflow by cutting an s-shaped ducting spanning the width of the enclosure. The shape will drop the sound, while then ducting keeps the air flowing. I would not recommend any sorts of filters to block the sound because they are a bit too restrictive for an enclosure in your style.

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 month ago

      I get about the same affect by placing a layer of the foam on the wall behind the fans. But you’re totally right. Without that lil bit the fan noise from the intake and exhaust was a lil noticeable

      • SkunkWorkz@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        30 days ago

        Also high density mass loaded vinyl works better for your enclosure. Foam helps against reflections but they still let sound trough. Mass loaded vinyl basically adds mass to the walls of your enclosure which stops them from transferring the sound waves to the outside.

        • Hamknight@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          30 days ago

          Does it help to point out this is vinyl backed foam 😉 really thin vinyl sheet on it, but it helps

    • Hamknight@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 month ago

      Thanks! For plex and frigate it’s been awesome. Also running tdarr to rencode everything to Av1 at 8mbs or less