I am looking to basically just transition to a small time, forever on, server to support my growing Plex footprint. I don’t need anything top of the line, and I’ve already crimped my lines to the room.

What’s the most cost effective way to go about this? Figured i would come to the pros.

Thanks!

  • unitedwithme@lemmy.today
    link
    fedilink
    English
    arrow-up
    21
    arrow-down
    5
    ·
    16 days ago

    Can I chime in without sounding anti-Plex? Nothing specifically against it, but they’re kind of going bad. Jellyfin is a lot more private and better to host for data control/privacy.

    Don’t get me wrong, Plex of easy to setup, configure, share, etc. with a lot of robust features, but their private equity or venture capitalist money has them selling/sharing data and are cutting out jobs to save money, etc.

    JF gives you the freedom Plex once did before its corruption. I’ve been on Plex 12+years and switched about a year ago.

    • D_Tom@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      6
      ·
      16 days ago

      See, I hadn’t even heard that. Is JF on anything like Apple TV (like Plex) or would i have to figure out the streaming part?

      • darcmage@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        13
        ·
        16 days ago

        It’s pretty much everywhere Plex is. The main issue is that it’s trickier to set up for sharing outside your LAN.

        • D_Tom@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          7
          ·
          16 days ago

          I would never be doing that, so I’m sold on it then. It’s basically just my backup movie/TV hub for my LAN.

          • darcmage@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            2
            ·
            16 days ago

            From my limited testing of tailscale a while back, I don’t see any reason it wouldn’t work. Saw no reason to switch from my wireguard setup.

    • technocrit@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      1
      ·
      15 days ago

      Can I chime in without sounding anti-Plex?

      There’s nothing wrong with being opposed to enshitified proprietary apps.

      • horus_son_of_isis@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        13 days ago

        Bingo. People can be so tribal about this shit. If you value privacy and hate subscriptions, jellyfin is you homie. It isn’t as hard to set up as some would have you believe (i’m a normie and have used it for years).

        If you don’t give a fuck about privacy and don’t mind paying some creep to make it easy for you to access your own files, then Plex is fine. This is the camp some people are in, and it’s just as legitimate as mine. Life is about gray areas and compromise.

  • skoberlink@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    16 days ago

    The comments aren’t doing a great job of explaining this but Plex can run on virtually any reasonably modern hardware: old laptops, thin clients, an old desktop, scrap parts. If you can get linux running on it, you can run plex for local network usage with one or two users.

    Where hardware starts to matter is if you need to expose it to lots of simultaneous users or you need to do lots of transcoding. I do know of some users with giant libraries where the libraries can be a little slow to browse but it can be helped with a cache SSD for the metadata.

    At this point the iGPU on intel processors is the easiest way to do transcoding and can handle a lot of streams with hardware transcoding. I used to have a nvidia card in my box and realized the iGPU was actually better anyway. I also think your streams should be direct play as much as possible. It’s much easier and more efficient to have your library on a flexible format to start and just avoid on demand trsnscode.

    If you need external access and need a VPN, you need a little extra power - or a separate device.

    Now, OP didn’t ask but I’ll give my two cents on Plex vs Jellyfin.

    Objectively, Plex is still the easiest to set and forget and is the most feature rich. I used it for something close to 15 years. I finally dropped it when I couldn’t watch live tv anymore because of a known bug they just refused to fix for over a year. That was the last straw for me on top of all the enshittification.

    I tried Jellyfin and found it lacking features and it was more difficult to manage securely. That led me to Emby. I’m not sure why it never comes up in these discussions. It’s a nice middle ground. Jellyfin is a fork of Emby from when Emby decided to go closed source to try to figure out a sustainable financial model so they’re very similar but Emby gives you back some of the convenience features from Plex.

    But ultimately I think this is a personal preference and none of these are one size fits all. Plex is a reasonable place to start but, in my opinion, Emby is worth a look. Jellyfin is the ultimate choice for open-source, personal control, and privacy that the other two can’t match because of their financial models.

  • ryeonwheat@lemmy.ml
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    16 days ago

    I haven’t used Plex in a while, but I presume it would go similarly to my Jellyfin migration this year.

    I pulled out a 10 year old laptop from my pile of scrap, installed a light-weight Linux server that can run containers, and I’ve been running LinuxServer.io’s Jellyfin container on it. Updates are pretty easy and I don’t have to worry about cluttering the host box’s packages with dependencies that may or may not conflict with the other things I run in it.

    If you have the time to figure out how to run apps in containers, I highly recommend doing so. There’s a lot of documentation for Docker, and Docker Compose files make managing the containers pretty easy.

  • Hamknight@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    15 days ago

    Going with a cheap used system, and then adding an Intel a310 is a good start. For getting drives, look into getting some external Seagate drives, popping them open, and using them internally. Just a couple ideas 😊

  • Lka1988@lemmy.dbzer0.com
    cake
    link
    fedilink
    English
    arrow-up
    1
    ·
    edit-2
    14 days ago

    My go-to for “server” hardware:

    • Old office desktop: Dell Optiplex SFF, HP Elitedesk SFF, Lenovo Thinkcentre SFF
    • CPU: 7th, 8th, or 9th gen Intel i7, preferably something with vPro (really neat OOB management - keep it local)
    • RAM: At least 8GB
    • OS drive: 256GB SSD at the minimum
    • OS: Debian
    • Media storage: Something large enough to store your media. 3.5" HDDs are great for this, but SSDs are better if you can get your hands on a large one.

    I also have a NAS based out of an old HP Proliant ML110 tower server case from 2004, outfitted with some modern-ish parts. I like it quite a lot. Very server-like, it does the thing.

  • SqueakySpider@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    1
    ·
    16 days ago

    I got a used thinkpad x1 carbon for under 200 a year ago from a used electronics store in my area. It’s running Debian and the YAMS stack, I found it easiest for me to get running as a docker noob

  • technocrit@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    1
    ·
    15 days ago

    Kodi. So much better than Plex or Jellyfin. Not even in the same category. It just takes more work to setup and customize because it’s so much more powerful. I recommend compiling from source, b/c repos can be old and flatpak is bloated.

  • OnfireNFS@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    15 days ago

    Personally I would do this

    Find an old laptop, desktop, any computer

    Put proxmox on it. It’s free and lightweight

    Create a Plex LXC. Also free and lightweight. There are community scripts to do this.

    You should get pretty good performance on Plex, you can manage the computer through a web browser and it only costs you whatever the cost of finding some hardware to put it on is

  • fribbtastic@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    15 days ago

    It really depends on what you need.

    Plex relies on the client device to provide the necessary compatibility to play thing, otherwise the server needs to transcode it into something that is playable.

    Which means that when you curate your library in a way that is completely compatible with your clients, you can run a Plex server on a raspberry pi. If you don’t, and you need transcoding then you also need the hardware to do so.

    This also depends on what needs to be transcoding, a 4K video will require a lot more performance than a 1080p Transcode.

    Then, you need to distinguish between the different types of transcoding, when you have a Plex Pass, you can use a GPU for the transcoding, otherwise your CPU needs to do that.

    In the last 1-1.5 years, the beelink mini pc with the N100 CPU was really popular because it was small, fairly cheap and had a iGPU in it that could even handle a couple 4K transcodes.

    So, the first thing I would do is check what your requirements are. Do you have Plex Pass to be able to utilise hardware transcoding? Maybe also look in other players like Plezy for getting better compatibility than the official Plex app.

  • JasSmith@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    1
    ·
    15 days ago

    So many different opinions, so I might as well weigh in.

    I’m a classic story of starting with a 1TB external HDD to now my 160TB server. I just kept going and didn’t know when to stop. It’s very affordable to make sure your server is extensible. Start with a decent case with lots of HDD bays. A Fractal R6 is excellent. A modern Intel CPU does great transcoding for x265 and AV1. No GPU required. Then you just need 8-16GB RAM (more is better, but it’s expensive right now). Maybe 256GB SSD (more is better, but it’s expensive right now). Get one HDD right now. Whatever has a good price/TB. They’re also expensive right now.

    The more important question is the OS. I actually prefer Windows. It’s free (if you look on Google how to activate it for free). If you get more than one HDD you should consider DrivePool to pool your drives. Works great and cheap one time cost. If it’s data you can just download again you don’t need to worry about backup. RAID is a good intermediary step, and for that SnapRAID works really well. You’ll need one HDD for parity, and a good rule of thumb is no more than 5-6 HDDs per parity. RAID means that if a disk dies, you can restore the data. Much cheaper than cloud storage.

  • horus_son_of_isis@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    13 days ago

    +1 for dropping plex for jellyfin.

    I nuked plex when they started requiring an internet connection to log in- meaning plex was phoning-home even though I had not exposed the service to the internet in any way. I don’t know about you, but I don’t need an evil corporation knowing my catalog of linux distros.

    • all of the plex premium options can be replicated for free, so fuckem.