I posted recently about wanting to install OpenWrt.
I just wanted to thank everybody who gave advice and encouragement. It was very quick and easy to setup.
I had some very small issues:
- I had to reboot my internet modem to get internet working. Duh.
- I initially didn’t put my country code for wifi, even though the docs say this is important. My bad.
- I initially set my wifi to WPA3, but I had to switch to WPA2 for my Roku. My bad for owning a Roku.
So far I’ve installed adblock and wireguard extensions, although I haven’t enabled the wireguard yet.
What other extensions do people recommend?
Thanks again!
Love openwrt. AdGuard and WireGuard server running. So handy.
Maybe switching to wpa2/wpa3 would help or creating a lone AP for your Roku would do the trick :)
And turns out if you lose you ssh key, you can just login using any string more than 256 characters. https://sshhole.com/
i believe openwrt uses dropbear by default instead of openssh
Oh that’s good. So it’s not vulnerable.
I initially set my wifi to WPA3, but I had to switch to WPA2 for my Roku. My bad for owning a Roku.
you can set more than one access points per physical radios.
so you can have wpa2 and wpa3 on the same radios.
you can have wpa2 and wpa3 on the same radios.
IME this caused all clients to disconnect and cease being able to auth. I just don’t run mixed auth for that reason.
2.4Ghz/W.G has WPA2 and 5Ghz/W.N/W.AC has WPA3. That’s what works for me on my LinkSys WRT 3200AC.
Set up aqm or whatever it’s called on openwrt.
It makes a huge difference.
SQM? https://openwrt.org/docs/guide-user/network/traffic-shaping/sqm
Thanks, that sounds like the exact problem that I’ve been having with my openwrt setup
Yes! I been in the Broadcom world so freshtomato calls it aqm.
Last time my fiber went down I still hadn’t configured USB tethering to work in openwrt. I had to connect the router to the mobile hotspot to install packages 😂 So if you have a USB port, don’t put it off for too long.



